فروش به دلیل مهاجرت، با این قیمت پیدا نمی شود. در صورت تعداد بیشتر از یک عدد و تخفیف مذاکره شود. در مورد موجودی لوازم جانبی همانند مموری و قاب و تبدیل آنتن وایفای در قبال هزینه مذاکره شود.
Hardware Specification of Banana ProTM
Allwinner® A20(sun 7i) SoC
ARM® Cortex™-A7 Dual-Core (ARM v7 instruction set) CPU
Mali400MP2 , supproting OpenGL ES 2.0/1.1(hardware acceleration support) GPU
1GB DDR3 SDRAM (shared with GPU) RAM
AXP209 PMU
Features
MicroSD (TF) card slot SATA 2.0 (suggest 2.5 inch SSD or HDD) Storage
10/100/1000Mbps ethernet (Realtek RTL8211E/D) Ethernet Port
WiFi 802.11 b/g/n 2.4GHz Wireless
1x IR receiver
2x USB2.0 Host USB
2x USB 2.0 OTG (all direct from A20 chip)
Supports multi-channel HD display Display
1x HDMI 1.4 (Type A – full)
1 1x LVDS/RGB/CPU display interface (DSI) for raw LCD panels Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out)
HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards
HDMI output Audio
Analog audio (via 3.5 mm TRRS jack shared with composite video out)
I2S audio (also potentially for audio input)
1x On-board micphone for audio input
1x Parallel 8-bit camera interface Camera
40 Pins Header EXPANSION
28x GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF. INTERFACE
1x Power status led (red) LED
1x User defined led1 (green)
1x User defined led2 (blue)
1x Reset button Button
1x Power button
1x U-boot button
5V @ 2A via MicroUSB Power Source
Android 4.2（4.4）/ Linux OS Support
Appearance characteristic
92mm × 60mm
45g Sizes
Banana Pro TM and Banana PiTM are trademarks of LeMaker Weight
